How to sand a deck floor?

After a thorough power washing, the wood fibres of the deck’s various components frequently rise as they expand with the water. Once dried, these elevated wood fibres often persist and can produce splinters. As a result, you should plan to sand your wood deck following power washing and before staining and sealing. This critical stage will guarantee that your refinishing work is a success.

Sanding a deck using a power sander comes in various configurations, from typical household orbital sanders operated by hand to professional upright rental sanders available at home improvement centres and rental shops. If done appropriately, any of these will effectively sand your deck. Most homeowners find that sanding using standard consumer power sanders is entirely doable. However, patience is necessary, especially when dealing with a big deck that may require many days of labour if utilizing a hand power sander. Visit the leading floor sanding in Perth today!

Best Floor Sanding Perth

How to Sand Deck Flooring

While the aim of sanding hardwoods is typically to achieve the smoothest possible surface, this is not the case when sanding an outdoor deck surface. Sand deck flooring with sandpaper with a grain of 60 or 80, but no coarser. Sanding using finer-grit sandpaper (100-grit or higher) smooths the wood to the point where the pores begin to shut, preventing stain or sealer from penetrating the wood. Apply moderate pressure to your hand sander, ensuring an equal look as you proceed.

Sand the Outer Edges of Deck Board

Sanding the deck board’s outer edges may be challenging, depending on the form of your deck, particularly if the railings have a shallow bottom baluster rail that makes access impossible. A minor detail sander may be advantageous in this case if your regular orbital sander would not fit. Again, sand the end grain of decking boards with a grit of 60 to 80, being careful to sand as evenly as possible since stains are frequently absorbed unevenly into the end grain if the panels are not sanded to uniform evenness.

What kind of paint do you use on a wood deck?

Exterior deck paints, either oil-based or water-based, are appropriate, but they should be intended for use on horizontal surfaces, not simply on a house or a fence.

How to Sand Between Deck Boards

Sanding between deck planks is a time-consuming process. Gaps can be uniform or uneven in shape depending on the shrinking of the wood. A tiny detail power sander with a grit range of 60 to 80 may be used, as well as a thin sanding block covered in sandpaper. The sanding block may even be able to complete both sides of the gap in a single pass. To achieve the most excellent staining effects, sand the wood as uniformly as possible.

If the deck boards have rounded edges, sand them with each pass, turning the sander. Wrap a paint stir stick or another suitable wood thickness in 60 to 80 grit paper and work your way through narrow gaps. A sawing action is frequently effective. However, joists might obstruct the motion. Additionally, if exposed timber joists are visible between boards, sand them to improve the protective stain or paint absorbency.

Should You Wash The Deck After Sanding?

After sanding, the deck should be washed to eliminate wood dust from the pores and wood surface. Sanding is necessary to remove high wood fibres left behind the following pressure washing the deck. Thus, power washing will elevate more fibres, necessitating further sanding and more drying time before re-sanding.

Sweep, vacuum, or blow (with a leaf blower) the sanding dust off the deck, and clean hard-to-reach places with a tack cloth. Once the dust has been cleaned from the whole deck, immediately apply the paint or stain. Keep a tack cloth on ready in case you come across any sanding dust.

Do you need two sinks in a commercial kitchen?

You will need to offer cleaning, disinfection, and storage facilities for operating utensils and equipment. These facilities must be corrosion-resistant, easy to clean and provide an appropriate supply of hot and cold water. They must also be connected to an effective drainage system. The following links can assist you in determining the number of sinks required. As a general rule, we will want a minimum of one double sink for washing and disinfecting equipment in the kitchen of a small café, takeout, or restaurant.

Additionally, you must build one or more wash hand basins in locations where open food is handled and prepared for the sole purpose of handwashing.

You will need to offer cleaning, disinfection, and storage facilities for working utensils. Along with a basin for cleaning equipment, you’ll need to supply a separate sink for washing food as required. Each sink or other food-washing facility must have an appropriate supply of hot and/or cold potable water and be linked to an effective drainage system. Sinks used to wash food must be maintained clean and disinfected as needed. For more information visit the leading stainless steel commercial sink now!

stainless steel commercial sink

What Material is best?

The great majority of commercial sink units are stainless steel, which is very sanitary, robust, and durable, making it ideal for use in high-volume restaurant kitchens. However, stainless steel comes in various grades, and the table you pick will be either 304 or 430 grade.

304 stainless steel (sometimes referred to as 18-10 when used to produce flatware) is a commercial-grade metal most frequently used in tables and sinks. The 18-10 refers to the chromium and nickel content, respectively, indicating that the metal is nonmagnetic.

430 stainless steel (also known as 18-0 when used to produce cutlery) has no nickel, making it more minor corrosion resistant than 304 stainless steel. This reduces the cost of manufacture and makes it relatively affordable to replace.

Choose between fully assembled or flat packed commercial sinks.

Wholly Assembled and Flat Packed

  • They are frequently welded to increase strength and durability Generally more expensive Simple to install in tiny spaces Generally less durable due to the lack of welded connections.
  • Increased joint stress resistance It’s challenging to enter small spaces or through narrow entrances. Generally less expensive, as you must construct it. Construction may be time demanding.
  • Delivery may be more expensive due to the item’s size. Delivery is frequently less costly when the product is more minor.
  • Can be disassembled and reassembled for transport or storage

Consider how frequently the unit will be used and the size of the entry points to the area where it will be utilized when deciding between an entirely constructed or flat-packed unit. If it will be used just once or twice a day and have a relatively small kitchen, a flat-packed sink is a better choice, but a pedestal sink is generally a better choice if you operate a bustling restaurant kitchen.

What Sinks Do You Need?

Having the appropriate variety of sinks in your kitchen can help maintain an efficient and clean working environment. The number and size of sinks required depend on your kitchen’s production and staffing levels; a tiny café will require fewer sinks than a 100-cover restaurant.

However, regardless of size, there are some sorts that every kitchen requires. These are the sink types:

  • Handwash sinks — built exclusively for hand washing

 You are intended to separate food preparation and washing from the area where you wash your hands or cookware, decreasing the danger of cross-contamination and assuring food safety.

  • Pot wash sinks – deep sinks used for cleaning cookware and utensils following cooking and dish preparation.

Can I sand my floor with a hand sander?

As I’ve previously stated, sanding hardwood floors by hand may be a lot of effort. This is strenuous labour that the use of a floor sander can facilitate. With that stated, I’ve spoken to far too many individuals who will continue to sand their floors by hand regardless of the outcome. As a result, it’s only natural that I write an essay about hand sanding wood floors. For affordable floor sanding in Gold Coast, please visit us now!

Leading Floor sanding in Gold Coast

How to manually sand a hardwood floor? 

Exactly like you would with floor sanding equipment, but with far more elbow grease! Begin with a low grit, such as 40, then work your way up to 60, 80, and finally 100. Utilize a portable orbital sander, preferably one that is gear-driven.

When it comes to this subject, the most critical factor to consider is efficiency. Specific hand sanders are far more powerful and effective than others, and it’s critical to give yourself an advantage.

Which hand sander is the best?

To spice up this essay, I’m going to rate them according to their aggression and efficiency.

Before I begin, I want to tell you that I will be critical of the tools you will most likely use to sand your floors by hand. I’m not trying to ruin your day or be cruel; I’m only trying to be truthful. Sanding wood floors using hand sanders will be extremely tiresome and time-consuming. To be forewarned is to be forearmed!

How much does it cost to sand and refinish hardwood floors yourself?

If you intend to DIY your hardwood floors, you should budget slightly less than $500 for every 275 square feet. The typical range is between $1,000 and $2,400.

The entire cost includes equipment rental and the purchase of sanding pads, wood stain, brushes, and finish.

What do I need to do to get my floors ready to sand?

  • Calculate the area When you know your square footage, it’s considerably easier to estimate your abrasive and finish requirements.
  • Take out all carpet, tack strip, carpet pad, and, most importantly, carpet staples (sanding over metal creates a spark hazard, and it can destroy the rubber drum or disc plate of a sander).
  • Nails on the floor should be removed or countersunk.
  • Remove all quarter-round; however, baseboards are not required. If your quarter-round is painted to the baseboard and removing it will require a significant amount of repainting or replacing, you can omit it. You’ll just need to exercise greater caution while edging and use a sharp scraper to wipe the floor all the way up to the quarter round. When you’re finished, you’ll also need to touch up the paint on the quarter-round.
  • Eliminate any doorways that lead into the room.
  • Remove all furniture, yes, all furniture, even draperies and wall hangings.
  • Raising and securing any low-hanging chandeliers is necessary to avoid hitting your head.

Due to the fact that fumes from oil-modified polyurethane may be fatal to tiny pets (birds, gerbils, guinea pigs; anything smaller than a rabbit), we demand that all animals be evacuated from the premises during the coating process. While larger dogs are permitted to remain in the home, we recommend securing them on a different floor to keep them away from the work area. If your pets are traumatized by strangers or loud noises, you may choose to send them on a little vacation until you are finished. Visit worksafe.qld.gov.au for floor sanding safety and preventaion.

Can I sand my floor with a hand sander?

The portable belt sander is significantly more capable of removing old finish and smoothing off dents and scratches than earlier sanders. While it will not match the pace of a standard floor sander, the handheld belt sander will get the job done in a fair amount of time.

 

How long do floor sanding and polishing take?

How long do floor sanding and polishing take?

Sanding and polishing floors typically take three days from start to finish. However, weather conditions may significantly affect this, so it’s always prudent to check on day three and give an additional day if it’s not completely dry.

With over two decades of experience in transforming any timber floor, internal or external, into a work of art. Visit the leading floor sanding in Melbourne today!

Best Floor Sanding Melbourne

Timber floor polish finishes

Nowadays, there is an enormous variety of finishes to select from, including the following:

  • Polyurethane based on solvents
  • Polyurethane based on water
  • Varnishes with an oil base

How to Choose Wooden Floors for Your Home

You’ve chosen to install hardwood floors or renovate your existing wooden floors to give them new life. That is an excellent investment that will undoubtedly revitalize the appearance and feel of your house! However, if you are inexperienced with the procedure, it can be intimidating not knowing what will be done or how long it will take. And, while it may sound complicated, reading up on what this includes may help you understand what has to be done and the do’s and don’ts for ensuring that the methods employed accomplish the desired objectives.

When do I need to resurface my floor?

While it is well-known that wooden flooring is long-lasting and robust, years of usage can cause damage to the surface. If not maintained properly, the finish might degrade over time, appearing hazy or damaged due to the use of solid floor cleaners, high heeled shoes, and exposure to dampness. And, while floor polish may give your floors a glossy sheen when appropriately done, if there are deep gouges in the wood and too many scratches, you may need to consider redoing your floors. This includes sanding and polishing the floor, which will do wonders for worn floors.

How do you prep a floor for sanding and polishing?

If you are presently occupying the space that requires resurfacing, remove all belongings and furniture to allow workers to work freely. This category also contains staples and tacks. Also, ascertain that the area is entirely unoccupied and that your contractor has continuous access to water and power, as these are necessary for floor sanding.

Additionally, if you have not yet completed painting your walls, do it first! However, leave the last coat off the skirting boards since it will undoubtedly come into touch with the floor sander.

If you cannot clear the space completely, cover any remaining objects with a towel to protect them from the dust generated by the sanding process. Additionally, ensure that there is sufficient illumination in the space for your contractors to work. Because sanding generates a lot of dust, it’s a good idea to cover vents, windows, and other openings to keep dust out.

What is floor sanding and polishing, and what is involved?

Sanding and polishing your timber wood floors is the most excellent method to maintain them and keep them looking their best. However, without regular sanding and polishing, grooves, scratch marks, and dents will accumulate, and the finish will gradually wear away, decreasing the life of your floor. Sanding is the process of removing the timber’s very top surface using exceptionally specialized sanding equipment. After sanding the floor (and removing any wood dust), a finish is applied to help preserve it and give the timber a lovely colour or shine.

How do I tell if my floors need sanding?

As a general rule, hardwood floors require sanding and polishing every 10-15 years. However, if the prior sanding and polishing procedure was not done correctly, your feet may require immediate care.

Suppose you find that the finish is peeling away from the wood or that the stain colour is unevenly spread (and does not correlate to heavy usage areas). In that case, these issues indicate that your floors were not properly sanded and polished, and you will need to have them wholly re-sanded and polished. Likewise, if you detect warping boards (which indicates water damage) or huge ugly stains (which cannot be cleaned with a wood floor cleaning), you should contact a professional floor sander.

Is facial plastic surgery permanent?

Plastic surgery is a big deal, and it comes with a lot of risks, costs, discomfort, and time away from work and some of your favorite hobbies. As a consequence, everyone expects that their therapy would have long-term effects. Unfortunately, this is not always the case, particularly with facial treatments. While face plastic surgery can give long-term results, they are not guaranteed. If you’re looking for affordable plastic surgery in Perth, visit cosmetic-surgery.com.au.

Plastic Surgery Perth

Long-lasting but not irreversible

To turn back the hands of time, most men and women choose face plastic surgery and non-surgical treatments. Anti-aging procedures make up a sizable portion of all facial cosmetic procedures. Wrinkles, skin laxity, and volume loss are all symptoms of aging that can be addressed with surgery such as a facelift, eyelid lift, or brow lift. Procedures aid in the slowing down, not the stopping, of time.

Facelift

From the cheekbones to the jawline, facelift surgery tackles wrinkles, skin laxity, and volume loss. This operation tightens and secures any underlying face tissues that have fallen, as well as trimming away any excess and unnecessary skin. Facelift surgery produces natural-looking outcomes that can make people appear years younger than they were prior to the operation.

Surgery on the Eyelids

Blepharoplasty, or eyelid surgery, is a procedure that addresses the signs of aging around the eyes. To restore a more youthful face appearance, this treatment removes extra skin and treats fat pockets on the upper and lower eyelids. This technique addresses not just natural aging but also lines and wrinkles induced by repetitive muscular motions.

Lifting the brows

Brow lift surgery, often known as a forehead lift, improves the appearance of the region above the eyes. A brow lift lifts sagging brows that contribute to a heavy look and decreases the depth of forehead wrinkles.

Unfortunately, as you become older and more sun-damaged, your skin and tissues will continue to deteriorate. As a result, these anti-aging treatments aren’t permanent. Facelifts, blepharoplasty, and brow lifts can restore youthful features, but they can’t stop the skin’s and tissues’ inevitable disintegration.

Exceptions to the General Rule

There are exceptions to the norm, as many operations are not permanent. Facial augmentation procedures such as rhinoplasty, otoplasty, and chin implants should last a lifetime. This is due to the fact that these operations affect your face structure, which does not change naturally over time.

Are The Procedures Temporary?

The only time you could require further surgery on your nose, ears, or chin is if you need a revision operation. Although the need for modification is uncommon, it is not unheard of. Patients don’t always heal the way they should, and extra problems might lead to a less-than-ideal outcome. Revision treatments, such as revision rhinoplasty, can correct or improve the outcomes of a prior surgical treatment that left you unhappy.

How To Maintain Results

Because the lifetime of plastic surgery results cannot be guaranteed, it is up to you to ensure that they are of high quality. To extend the life of your results, you must keep new symptoms of aging from appearing too rapidly. A few basic techniques will help you achieve this.

  • Every day, apply sunscreen (a broad-spectrum SPF 30 is usually sufficient).
  • Avoid going outside during the hottest part of the day (between 10:00 a.m. and 4:00 p.m.).
  • Maintain your skin’s hydration (apply moisturizers and lotions and drink water).
  • Smoking is not permitted.
  • Maintain a balanced diet.
  • Non-surgical injectable treatments, chemical peels, facials, and laser resurfacing can be used in conjunction with surgical procedures.

Do facelifts ever look natural?

The most common operation performed at Facelift Perth is a facelift. To get a natural look, the board-certified plastic surgeon works with your specific face anatomy.

Facelift Perth

Advanced Technologies and Experienced Surgeons

Because of advancements in technology and processes, that artificial appearance is a thing of the past. Plastic surgeons no longer depend only on skin tightening. Instead, they tighten connective, underlying tissues in the face and neck using precisely placed sutures. Surgeons may now tighten up and raise the skin and transfer unsightly fat pockets, all through small, deliberately placed incisions.

Facelifts are, without a doubt, the most common surgery performed in Facelift Perth. Our board-certified plastic surgeon works with your particular facial architecture to eliminate wrinkles, tighten facial muscles, and debulk facial features for a revitalized face and neck area.

Can a Facelift Look Natural?

One of the most common concerns individuals have regarding facelift surgery is that the results may not appear natural. This is a reasonable apprehension. It wouldn’t take long to locate lists and photographs of “plastic surgery flops” on the internet. While there is no doubting that cosmetic surgery operations have produced some unattractive and unnatural outcomes, those “fails” are rare. They are frequently the consequence of untrained doctors who ignored the underlying reasons of face aging. Facelift results can be some of the most natural-looking of any cosmetic treatment when performed correctly by a professional physician, leaving you with a revitalized and more young facial appearance.

Specific strategies must be used to guarantee that the results you achieve match the level that you envision. When they are, you will notice a difference in the tautness and general quality of your skin, as well as the fact that you will seem relaxed and rejuvenated. Those who are close to you will notice your youthful glow but won’t tell you how you got there.

Is a Facelift Perth Right for Me?

While many patients believe that a facelift would tighten their entire face, it is vital to note that a facelift is a specialist surgery that targets the bottom two-thirds of the face, including the cheeks and jawline. Surgeons may offer a brow lift or eyelid tuck in conjunction with your facelift if you want to tighten the upper portion of your face as well. Many patients find that combining a facelift with a neck lift produces the most outstanding results. If you have wrinkles in the middle of your face, facial skin laxity, drooping cheeks, or bowling, you may be a good candidate for a facelift.

What is Recovery From a Facelift Like?

The time it takes to recover from a facelift is determined by the type of treatment performed. For the most part, it is a short procedure for patients. Patients should expect some swelling and bruising after surgery, which is typical and will subside over the next 10 to 14 days. It’s also crucial to give your body time to recuperate after the treatment. Most doctors recommend resting for two weeks before returning to normal daily activities and four weeks before engaging in vigorous exercise. For minor scar or mini-facelifts, these periods can be significantly shorter.

How Does Facelift Surgery Work?

The methodology used by a cosmetic surgeon during a facelift is determined by several aspects, including the patient’s anatomy and personal objectives, the extent of the facelift (mini vs. standard), and whether or not another surgery is being performed at the same time. Facelifts are usually performed under general anesthesia; however, local anaesthetic with sedation may be employed in some cases.

The skin is separated from the underlying connective tissue and muscles once the initial incisions are made. This enables the cosmetic surgeon to realign the deeper facial tissues, eliminate jowls, and give the skin a more substantial base. The extra skin is then removed, and the remaining skin is delicately repositioned over the newly regenerated facial tissues, giving the face a smoother, more youthful shape without overtightening.

 

How Do You Clean A Stainless Steel Bench?

There’s a reason stainless steel is the most popular bench material. Stainless steel is a long-lasting and easy-to-clean material. Furthermore, some stainless steel grades are bacteria-resistant and can be utilized as a food-contact surface. The stainless steel bench in Perth, like any other metal, can corrode if it is not properly cleaned and maintained.

stainless steel kitchen bench

What Characterizes Stainless Steel?

On the outside of all stainless steel surfaces is a thin layer of chromium. The chromium layer reacts chemically with air to provide a smooth, hard surface that is stain and corrosion-resistant. Stainless steel will discolor, corrode, or rust if something damages or interferes with the chromium/air contact (such as dirt, oil, or scratches). As a result, constant cleaning is required, particularly in restaurants.

How to Keep Stainless Steel Benches Clean

The chromium layer on stainless steel will never wear away, unlike other stain-resistant coatings that might wear away after repeated cleaning, therefore you can never clean stainless steel too much. To effectively clean your stainless steel benches, follow these cleaning instructions:

  • Use a damp towel and a mild detergent to clean. A wet bar towel is usually the finest cleaning solution for stainless steel benches, but if you must use a cleaning agent, add a mild detergent to the wash water.
  • Wipe in the finish’s direction. A brushed finish or grain can be found on some stainless steel surfaces. Scrubbing across the grain might ruin the finish, so go with the grain when cleaning.
  • Baking soda can be used to remove baked-on oil. When water and detergent aren’t cutting it, mix baking soda with water to produce a paste for tougher stains. You can also use a commercial cream cleanser that isn’t harsh.
  • Spills should be cleaned up right away. Spilled food, particularly acidic food, can harm the protective chromium layer if left too long, so clean up spills as quickly as possible with a moist towel. Because the food will not have been dried or baked on, it will be easier to clean afterward.
  • Detergent for Glass To remove fingerprints, use a glass cleaner. Fingerprint oil has the potential to etch or discolor stainless steel, particularly mirror-polished coatings. Use a glass cleaner to remove fingerprints anywhere stainless steel is visible at the end of the day before the finish is irreversibly destroyed.
  • After cleaning, give the surface a good rinse. After cleaning, rinse your stainless steel benches with clean water and a moist towel to remove any remaining soap or detergent, which can be dangerous if kept for a long time.
  • Dry as soon as possible. Hard water stains can also tarnish a stainless steel sheen. To prevent watermarks from appearing, simply dry the surface after cleaning.

Cleaning Stainless Steel Benches: What to Avoid

There are a few things to bear in mind when cleaning stainless steel benches.

Chlorine is more harmful than beneficial. Chlorine, or chlorine-based cleansers, will kill any bacteria on the stainless steel surface, but it will also dissolve the protective chromium coating. If you need greater bacteria-killing strength, use an ammonia-based solution instead.

Steel wool and abrasive sponges should never be used. Brillo pads and steel wool are abrasive cleaning equipment that damages stainless steel and cause it to rust. When additional scrubbing strength is required, only use brushes and pads made of nylon, soft plastic, or any other soft flexible material.

Stainless steel cleansers should only be used as a last resort. Because it is an actual coating created to repair the damage, stainless steel cleansers or polishes should only be used if the surface becomes damaged or discolored. Polishing isn’t necessary if the steel isn’t damaged. The polish can help eliminate the stain and prevent corrosion in the scratched areas.

Can you claim breast augmentation on Medicare?

Medicare covers medically essential plastic surgery operations with low out-of-pocket payments. After an injury or trauma, repair, fixing a deformed bodily component, and breast augmentation after a mastectomy due to breast cancer are all Medicare-approved plastic surgery operations.

Even if your plastic surgery operation is covered, you will still be responsible for your plan’s out-of-pocket charges, such as deductibles, coinsurance, and copays.

The plastic surgery industry is a multibillion-dollar business. If you have Medicare, you might be wondering if some plastic surgery treatments are covered. Visit us for affordable Breast Augmentation Perth today! 

Breast Augmentation Perth WA

What about Lipectomy or skin reduction in the abdominal area after bariatric surgery or significant loss of weight?

If rigorous conditions are satisfied, Lipectomy and skin reduction after weight loss or bariatric surgery may be funded. However, photographic proof and testing are required.

If you’re considering an abdominoplasty or skin reduction following a weight loss that isn’t connected to pregnancy, your coverage will likely be determined by how much skin redundancy you have and how much these weight shifts contribute to your health problems.

What happens if breast implants are not replaced?

Implant ruptures and leaks are a danger of breast augmentation or reconstruction. If this happens, however, surgery is not required straight soon for medical reasons. You may notice an evident difference in the look of your breasts if your saline implant has burst.

Does Medicare Advantage Cover Plastic Surgery?

In each location, Medicare Advantage plans have different requirements; inquire about plan prices with the firm. Cosmetic surgery is not covered since it is done to improve one’s appearance. Plastic surgery, on the other hand, corrects damage or sickness. Advantage plans must cover at least the same expenses as Medicare. So, if you’re denied, use the advantage plan to file an appeal. Nobody will protect you if you don’t have medical proof.

Where cosmetic and reconstructive procedures overlap?

There are some medically necessary plastic surgery procedures that may also classify as cosmetic surgery procedures. For example, rhinoplasty to correct a malformed nasal passage may also improve the look of the nose. Or excess eye skin removal to fix vision problems may enhance the face of the eyelid. However, these reconstructive surgeries are not the same as those performed for purely cosmetic reasons.

What is breast reconstruction surgery?

A person may opt to have breast augmentation after undergoing a mastectomy, which is surgery to remove a breast. Doctors use one of the following strategies to do this:

  • Uses of implant
  • Usage of tissue from a different region of the body use of both

Reconstruction surgery can be done at the same time as the mastectomy. They may also want to wait until the wounds from the mastectomy heal, and the cancer treatment is finished, which might take months or years.

Breast reconstruction surgery may sometimes include surgery on the breast that is not damaged to make both breasts the same size and form.

All types of breast reconstruction surgery carry the risk of complications. Depending on the method, these may include:

  1. infections
  2. death of tissue
  3. blood clots

Medicare may not cover some types of breast augmentation surgery. For example, if the goal of surgery is to have a more balanced look, it may not fulfil the coverage requirements.

Anyone considering breast surgery should verify their Medicare coverage to determine if the treatment is covered.